Kygo A9/600 Manual Del Usuario página 7

E N G L I S H
Battery Capacity status: When connected to iOS devices, the
headphone's battery power status is displayed in upper right corner of
device's screen.
Charging: A new headphone has enough power for pairing and dialing out
several times. When it has low battery, please charge via USB cable for
2 hours. During charging, red LED flashes. Once fully charged, blue LED
remains on.
Reset Mode: Connect headphones to computer via Micro USB cable.
When red LED light flashes, reset is complete.
12
E N G L I S H
3.5mm music line-in function: Connect audio line-in cable to
3.5mm audio jack for wired music. (Phone call function can still be used
in this mode).
Before connecting your audio line, please ensure that the headphones are
powered OFF.
1. Connect the 3.5mm audio cable to the headphone and audio
player.
2. Adjust volume of the audio player or music player to reach the
desired level
13