Descargar Imprimir esta página

Procedure Di Installazione; Installation Procedure - newform X-SENSE 62510 Instructions De Montage

Ocultar thumbs Ver también para X-SENSE 62510:

Publicidad

PROCEDURE DI INSTALLAZIONE_ INSTALLATION PROCEDURE_ PROCÉDURES D'INTALLATION_
X-SENSE
INSTALLATIONSANWEISUNGEN_ INSTRUCCIONES DE MONTAJE
I

PROCEDURE DI INSTALLAZIONE

1 - Avvitare i flessibili.
2 - Collocare il rubinetto sul piano del lavabo e posizionare
inferiormente il set di fissaggio.
3 - Serrare i dadi di fissaggio e collegare correttamente i fles-
sibili alla rete di alimentazione.
ATTENZIONE: Durante l'allacciamento alla rete idrica, tenere
fermo il flessibile per evitare che si sviti dal corpo del rubi-
netto.
GB

INSTALLATION PROCEDURE

1 - Screw on the flexible hose.
2 - Place the tap on the surface of the washbasin and posi-
tion the fixing set below.
3 - Tighten the fastening nut and correctly connect the flexi-
ble hoses to the water supply.
WARNING: During the connection to the water network,
keep the hose steady to prevent it from unscrewing from
tap's body.
F
PROCÉDURES D'INTALLATION
1 - Visser les flexibles.
2 - Placer le robinet sur le plan du lavabo et placer dessous
le kit de fixation.
3 - Serrer les écrous de fixation et raccorder correctement les
flexibles à l'installation d'eau.
ATTENTION: Pendant la connexion au réseau hydrique, tenir
le flexible immobile pour éviter qu'il se dévisse du corps du
robinet.
D
INSTALLATIONSANWEISUNGEN
1 - Die Schläuche festschrauben.
2 - Den Wasserhahn auf dem Waschbecken und den Befesti-
gungssatz darunter positionieren.
3 - Die Befestigungsmuttern anziehen und die Schläuche kor-
rekt an das Versorgungsnetz anschließen.
ACHTUNG: Während des Anschließens dem elektrischen Netz
soll der flexible Schlauch fest gehalten werden, um zu vermei-
den, dass er sich von dem Mischerkörper herausschraubt.
E
INSTRUCCIONES DE MONTAJE
1 - Atornillar los flexibles.
2 - Apoyar el grifo sobre el plano del lavatorio y por debajo
del mismo colocar el set de fijaciòn.
3 - Cerrar fuertemente las tuercas de fijaciòn y conectar cor-
rectamente los flexibles a la red de alimentaciòn.
CUIDADO: Durante la conexión a la red hídrica mantengan
firme el flexo para evitar que se destornille del cuerpo del
grifo.
5

Publicidad

loading

Este manual también es adecuado para:

X-sense 62525X-sense 62513