Description Of The Appliance And Accessories - Imetec 7727J Instrucciones Para El Uso

GB
water system and the CO
• Use only CO cylinders at ambient temperature.
2
NEVER gas an empty PET bottle or without having inserted the bottle filled with water at the level
•
indicated inside the sparkling water system.
NEVER use deformed, faded or broken bottles.
•
• NEVER use bottles after the expiry date indicated on the back of the same bottle.
• CO is pressurised inside the cylinder. Keep it in a cool place. Never expose it to direct sun light
2
or heat sources. Maximum temperature 50°C.
NEVER freeze the CO
•
• NEVER freeze the water bottles.
• DO NOT shake the bottle after gassing. In case of pressure increase inside the bottle, slowly
open the same to decrease pressure.
Use only PET IMETEC code 7729 bottles
•
DO NOT tamper with the CO
•
• Implement gassing only when the appliance is upright
Never remove the bottle during gassing
•
ATTENTION!:
Keep the cap of the CO

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

Consult the figures [Fig A-B-C-D-E] in the illustrations section to verify the packaging content.
All illustrations are in the cover pages:
1. Removable cover for cleaning of the bottle support
2. PUSH key
3. Support for PET bottle
4. Tube for gassing
5. PET bottle
a. Cap
6. Filling level
a. MIN level
b. MAX level
7. Rear cover
8. Release key
9. Connector
10. CO cylinder
2
a. Seal
b. Cap
11. Connection hooks of the rear cover
12. Guide for CO cylinder
2
6
MI000339.indd 6
cylinder must always be transported separately.
2
cylinder.
2
cylinder
2
cylinder in case of replacement or returning of the same.
2
08/07/10 16.41