Hotpoint Ariston MCA 16/HA Instrucciones De Uso página 21

Use the key to choose whether to enable the
function
SHOW CLOCK TIME
ON
Save using the key.
! Note: the time is only displayed at certain times. This
function can only be disabled by the user.
To disable this function, use the
SHOW CLOCK TIME
OFF
Save using the key.
Regulating on/off times
The machine can be programmed to switch on and off
automatically. Only one "on" time and one "off" time
can be programmed on the machine.
! Note: this function is enabled only if the main switch
is in the "I" position (on).
Use the key to select this function:
ON/OFF TIME
SHOW CLOCK TIME
Enable it with the key.
ON/OFF TIME
ON TIME
Set the "on" time by pressing the
using the key.
Next, press the key to set the minutes and
save using key.
ON/OFF TIME
OFF TIME
Set the "off" time by pressing the
using key.
Next, press the
save using
*
! Attention: if the on and off times coincide, the
machine ignores both settings. The clock must be
enabled after this programming in order to function
correctly.
To enable automatic on/off
key to choose:
! Note: this function is enabled only if on/off times has
been programmed.
*
Use the
Enable it with the
In this case
Enable the function with the
display shows
*
save using the
Check the parameter settings when exiting
programming. If the current time falls within the
0:00
disabled period the display shows:
key and save
! Note: during the disabled phase the machine may
be reactivated at any time by pressing the
disable the machine again, go into programming by
pressing
0:00
key.
key and save
key to set the minutes and
key.
key to select this function:
AUTOMATIC ON/OFF
CLOCK TIME
key.
AUTOMATIC ON/OFF
NO
disables this function.
key and when the
AUTOMATIC ON/OFF
YES
key.
STANDBY
and exit immediately by pressing the
NA
*
key. To
21