Areas Of Application; Installation; A 812 And A 813 Adapters - Miele A 814 Instrucciones De Manejo

A 812 and A 813
adapters

Installation

Remove a nozzle from the injector manifold of your upper basket or

mobile unit.
A 814
A 814/1
Screw the holders in at this position.

Tighten the holders with the aid of an open spanner (width across

flats 9 mm).
To increase capacity, you can combine the A 814 and A 814/1 hold-
ers with the A 812 or A 813 adapters. Both adapters each have
4 ports. The A 814 and A 814/1 holders may be fitted to a maximum
of 3 ports. The 4th port (in the centre) must always be sealed with a
blind stopper.
- The A 812 adapter can be used on injector manifolds with silicone
holders.
- The A 813 adapter is intended for use on injector manifolds with
screw connections.
en - Areas of application
33