Change Batteries; Technical Details - Testboy 113 Intrucciones De Uso

Thank you for purchasing the Testboy 113.
•
Contact-free voltage tester from 12 to 1000V AC
•
Torch lamp with high efficient LED
•
Acoustic warning tone
1a.) Contact-free Voltage Test
The Testboy 113 is able to seek live wires out with the circuit integrated in
the point. When recognizing an alternating voltage of 12 V AC, the white
cap flashes up red (see picture point 1a) and a warning tone rings out.
A current flow is not necessary!
1b.) Torch lamp
Switch on the integrated flashlight by pressing the knob (see picture
point 1b). With the high efficient LED an illuminated period of up
to 100 hours (per battery set) is attainable! The life span of the LED is
more than 100,000 hours.

2.) Change Batteries

Take a screwdriver and lever out the battery case at the indentation
(see picture point 2).
Pay attention when inserting the new batteries to the polarity!
Do not dispose the empty batteries with the domestic refuse.
In your proximity is a suitable collecting point!

Technical Details:

Voltage Range:
Current supply:
Protection:
Overvoltage Category:
TÜV/GS approval:
Warranty
As an ISO 9001 certified enterprise we guarantee you a constant
high quality of our products. This makes us possible
to grant you a guarantee of 3 years on our Testboy-products.
Fields of application
The tool is intended for use in applications as described in the operating
instruction only. Any other form of usage is not permitted and can lead to
accidents or destruction of the device. Any misuse will result in the expiry of all
guarantee and warranty claims on the part of the operator against the manufacturer.
This operating instruction is provided with large care. For the correctness and completeness of the data,
illustrations and designs no guarantee is taken over. Subject to change.
Declaration of conformity
This product fulfils the low voltage guidelines 72/23/EWG and EMV-guidelines 89/336/EWG.
GB Operating Instructions
12 – 1000V AC
2 x 1,5 V type AAA micro
IP 44
CAT III 1000V
IEC/EN 61010-1 (DIN VDE 0411)
- 3 -