Health O Meter 7633 Manual De Instrucciones página 13

3
. Once the monitor inflates the cuff to approximately 180 mmHg, measurement
will begin.
This monitor will re-inflate automatically to approximately 220 mmHg if the
system detects that your body needs a higher pressure to measure your
blood pressure.
4. When the measurement is completed,
systolic, diastolic, and pulse will be shown
simultaneously and be saved automatically
into the memory. The last 90 measurement
readings will be saved into memory.
5. Measurement is now complete. Press the
ON/OFF/START button "
the monitor off. The unit will automatically
shut-off after 1 minute if no buttons
are pressed.
Note:
1. This monitor automatically switches off approximately 1 minute after the last
button operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
" to turn
13