General Information; Packing List; Technical Specification; Connection - Selecta PH35 / IP65 Manual De Instrucciones

INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80387 REV B

1. General Information

• Handle the parcel with care. Unpack and check that the contents coincide with
the packing list. If any part is damaged or missing, please advise the distributors
immediately.
• Do not install or use the equipment without reading this handbook first. This
instruction manual must be attached to the equipment and must be available for
all users.
• If you have any doubts or enquiries, contact with J.P. SELECTA's technical
service. Do not use the equipment in explosive, flammable or corrosive atmos-
pheres.

2. Packing List

IP65 ARC Analyzer PH / RED
Electrode connection cable
Electro Polilyte PLUS H ARC 120
* We recommend to take note of the SN serial number and the LOT lot
number from the electrode label for spare parts management.

3. Technical Specification

Power supply 1x230 VAc-50/60Hz - 160W - 1A
Power consumption 1 A.
Protection IP 65
3.5'' color touch screen
Relay outputs potential free (10 Amp.) for O
Computer visualization and control software.
USB connector.
POSSIBILITY OF:
8 Digital tickets for events.
2 Analog inputs for process variables.
4 Relay outputs for alarms or PID control.
Connection of up to 6 Arc electrodes of any type.
Display and control from App for mobile phone, computer, tablet, etc.

3.1 CONNECTION

Do not use the equipment without connecting the grounding.
Make sure that the device connects to a network voltage that matches the
one indicated on the feature board.
If you change the plug, keep in mind the following:
Blue cable:
Brown cable:
Yellow/Green cable:
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
03/2021
, cold, acid and base
2
Neutral
Phase
Earth
Tel 34 937 700 877 Fax 34 937 702 362
Page: 10
4120823