Cleaning & Maintenance
General Maintenance
Turn off and unplug the fan before cleaning.
• Only use a soft clean cloth to gently wipe the
outer surfaces.
• DO NOT immerse the fan in water. Never allow
water to drip into the motor housing.
• DO NOT use chemical or abrasive cleaning
agents to clean the fan.
• DO NOT attempt to open the fan for self-
servicing. Doing so will void your warranty and
may present a hazard.
• It is recommended to use pipe cleaners or
flexible dust wands to clean in between the
vents.
• A vacuum cleaner (with a brush hose attachment)
can be used to clean the vents.
• For best results, clean in between the vents
using compressed air to blow out any residual
dust inside the fan.
Storage
When not in use for long periods of time, store the
fan in a safe, dry location. It is recommended to
store the fan in its original packaging to protect it
from dust, moisture, and direct sunlight.
Replacing the Remote Control Battery
1. Press the locking tab toward the pulling slot to
remove the battery compartment. [Figure 4.1]
2. Properly dispose of the old battery.
3. Place a new 3V CR2025 battery into the battery
compartment with the positive side facing up.
[Figure 4.2]
4. Replace the battery compartment into the
remote.
Figure 4.1
Figure 4.2
- 13 -