Dantherm HCP 10 Manual De Instalación Y Usuario página 8

Using the control panel,
Filter and error This button is the alarm reset. If the LED lights up in orange it's a warning
indications indicating that the filter needs to be changed. Please see the service guide
section in the Service Manual for the product to learn how to replace the
filters.
Press the button once to mute for a period of time
When there is an alarm on the unit the alarm LED will flash red as many times as the
alarm number (see error number in the Service manual of the ventilation unit).
This visual LED alarm will be followed by a buzzer sound on the HCP11.
Remote Control
continued
Press and hold for 10 seconds to reset the filter timer. This can be done with or
•
without filter alarm is present
Error indicated by
HCP 10 Flashing LED
HCP 11 Flashing LED and buzzer sound
6