Using Your Blender - Hamilton Beach Sound Shield 950 Manual Del Usario

Using Your Blender

6
1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar
before twisting collar
onto bottom of jar. Add
Ingredients.
4. Plug into outlet. Press
ON(I)/OFF( ) switch to turn
on power to the blender. The
control panel will flash and
CANCEL button will continue
to flash, indicating blender
is ready for blending. Press
ON(I)/OFF( ) switch to OFF
( ) position anytime machine
is left unattended.
IMPORTANT: The blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call toll-
free customer service number to obtain replacement parts.
2. Place lid on jar. Place blender
jar on base.
3. Close quiet shield.