Wiring Remarks - Spectravision Adagio PRO Instrucciones

Wiring remarks

For installations with PLP-REM & PLP-REM-300
Third party equipment such as frequency inverters and electric motors can generate
excessive noise on the 230VAC / 400VAC power line.
This noise might be injected into the adjacent 12VAC power line and disturb the power
line communication towards the Adagio
To prevent this, please take care of the following:
Keep 230VAC / 400VAC power line cables at least 50cm separated over their
!
full length from the 12VAC power line towards any RGB lights
Do not mix 12VAC and 230VAC / 400VAC power line cables into the same cable
!
trays
12
Pro RGB lights.