Remote Control - ION Holiday Party Plus Guia De Inicio Rapido

Remote Control

Use the remote control to start/stop the motor, set the light timer, select individual colors, and
power the unit on/off. Point the remote control at the front sensor on the dome light and press
the button of the option you would like to select. See the diagram for button descriptions.
Note: Before using the remote control for the first time, pull out the tab attached to the battery
compartment. To change the remote control battery, follow the diagram located on the back of
the remote control. Use a 3V DC CR2025 lithium button cell battery for replacement.
•
ALL ON/OFF = Switches the colors on or off.
•
R On/Off = Switches the red color on or off.
•
G On/Off = Switches the green color on or off.
•
B On/Off = Switches the blue color on or off.
•
W On/Off = Switches the white color on or off.
•
P On/Off = Switches the purple color on or off.
•
O On/Off = Switches the orange color on or off.
•
R Only = Switches only the red color on.
•
G Only = Switches only the green color on.
•
B Only = Switches only the blue color on.
•
W Only = Switches only the white color on.
•
P Only = Switches only the purple color on.
•
O Only = Switches only the orange color on.
•
Still = See the Light Modes section for Mode details.
•
Fades = See the Light Modes section for Mode details.
•
Flash = See the Light Modes section for Mode details.
•
Spin = See the Light Modes section for Mode details.
•
Show = See the Light Modes section for Mode details.
•
Timer = Selects how long the lights will stay on (2, 4, 6, 8
hours or always on). The lights will also turn back on at the
same time each day (24 hour timer).
•
Power On/Off = Puts the unit to sleep (all lights and motor are
off).
W
W
7