Inserting the batteries in the remote control
Open the cover on the back of the remote control.
Put the batteries in the remote control, while observing the correct "+" and "-" polarities as
shown.
Put the cover back on.
Orientation of the remote control
Aim the remote control at the infrared sensor on the front of the TV at a 60° angle so that it can
receive the transmitted information.
The remote control has a range of 5 metres.
•
Make sure that there are no obstacles between the remote control and the infrared sensor
•
and that no sunlight or other light source is reflected on them.
The remote control works with two AAA LR03 1.5 V batteries. We recommend using only
•
alkaline batteries. Remove the batteries from the remote control if you are not going to use it
for a long time (more than one month).
Used batteries must be disposed of safely. Place them in specially designated collection bins
•
to protect the environment.
V.1.0
38