Assembling The Stand; Foot Assembly - Listo 32HD-843 Instrucciones De Uso

ASSEMBLING THE STAND

39
Cover a flat, stable surface with a
soft cloth. Lay the appliance, face
down, on the cloth.
Take both feet out of the packaging and
attach them to the lower part on either
side of the appliance as shown in the
diagram opposite.
Feet made of
plastic (x2)
Use a screwdriver to tighten the two sets
of screws under each foot. Do not over-
tighten, to avoid damaging the plastic
parts.
PM4x14 (x4) screws
V.1.0