Installation - Chamberlain 940EV Manual De Usuario

Installation

Select a location to mount the Keyless Entry at a minimum height
1
of 5 feet (1.5 m) out of reach of children.
2
Remove battery cover and battery.
3
Mark the top mounting hole and drill 1/8 inch (3.2 mm) pilot hole.
4
Install the top screw, allowing 1/8 inch (3.2 mm) to protrude above
the surface. Position the Keyless Entry over the top screw.
5
Mark the bottom hole and drill 1/8 inch (3.2 mm) pilot hole. Install
the bottom screw. Do not overtighten to avoid cracking the plastic
housing.
6
Reinstall battery and replace cover.
7