Sunny Health & Fitness SF-B1002C Manual De Usuario página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669)
#79 S13-14-15 1PC
#80 S13-15 1PC
#19 M10*25*S6 2PCS
#20 d10*Φ20*1.5 2PCS
#78 S6 1PC
STEP 5:
Loosen and remove the [Seat Post] Adjustment Knob (No.
16). Insert Seat Post (No. 2) into the post housing located
on the back of the Main Frame (No. 1). Adjust the Seat
Post (No. 2) to the desired position; reinsert and tighten
Adjustment Knob (No. 16) to secure the post in place.
Loosen and remove the [seat slider] Adjustment Knob
(No. 16). Insert Seat Slider (No. 7) into the Seat Post (No.
2). Adjust the Seat Slider (No. 7) to the desired position;
reinsert and tighten Adjustment Knob (No. 16) to secure
the post in place.
Secure Seat (No. 26) to the Seat Slider (No. 7) with
Spanner (No. 79) and Wrench (No. 80).
NOTE: Before you fully tighten the seat, you can adjust the
front of the seat higher or lower to meet your needs. In order
to properly tighten the seat, it is important to note that you
will need two open faced wrenches (1 for each side) and
will need to tighten the nut on each side simultaneously
working in opposite directions of each other.
STEP 6:
Loosen and remove the [handlebar] Adjustment Knob
(No. 16). Insert Handlebar Post (No. 4) into the post
housing located on the front of the Main Frame (No. 1).
Adjust the Handlebar Post (No. 4) to the desired position;
reinsert and tighten the Adjustment Knob (No. 16) to
secure the post in place.
Secure Handlebar (No. 3) to Handlebar Post (No. 4) using
2 Screws (No. 19) and 2 Washers (No. 20). Tighten and
secure with Allen Wrench (No. 78).
The assembly is complete!
11