Before using, please read the following information
Charging the battery
Connect the charger supplied to a power outlet in your home and to the
Micro USB port of your tablet. The tablet will start charging.
Loading and unloading of the battery must be complete, never less than
6h. Do not disconnect the charger until the full charge of the battery is
finished, otherwise it will shorten the battery life.
On/Off Button
To turn on the device hold the on/off button until the screen lights up.
Once the system loads click on the lock icon and drag to the right, as
seen in the image below:
If you drag to the left the camera appears directly
To switch off the device hold the on/off button until it appears on the
display to turn off the device and accept.
When the battery is low it will turn off automatically.
Locking and unlocking the screen
Screen Lock: Lightly press the On / Off button and the display will be
locked and power saving mode.
Unlock Screen: Lightly press the On / Off button and the display press
padlock icon and drag to the right to unlock.
Connect the tablet to a PC for file transfer
Turn on the device and once unlocked connect via the USB cable to
the PC, and show the "USB Connection", click on "Turn on USB storage"
interface the storage medium of the memory of the tablet in your PC
appears. Now you can transfer data between your PC and the tablet.