Unpacking And Assembly - DuraHeat DH2304 El Manual Del Propietario

NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!

UNPACKING AND ASSEMBLY

CAUTION: "RISK OF BURNS"
DO NOT OPERATE HEATER WITHOUT INSTALLING THE PROTECTIVE GUARD OR GRILL.
1. REMOVE THE HEATER AND ALL PACKING MATERIALS FROM THE BOX. (Fig.2)
NOTE : Save the shipping carton and packing
materials for future storage.
Heater.
Top guard.
Handle.
Top plate
2 "C" cell batteries.
Siphon pump.
Bag of screws for top grill assembly.
Owner's manual.
Safety Tips Manual.
2. ASSEMBLING.
A) Remove all packing materials from heater: (Fig.3)
B) MOUNTING TOP PLATE: (Fig.4)
Align the arrow marking on the top plate with the carrying
handle hole on the cabinet and place the top plate on the
cabinet.
C) INSTALLING FRONT AND REAR GUARDS:
(Fig.5A and Fig.5B)
Hang the upper portion of the front guard (notched to
allow for the igniter door) on the Upper Grill brackets with
the downward hooked grill rods. (Fig.5A)
Snap the lower portion of the front guard into the holes in
the Lower Grill brackets with the inward hooked grill
rods. (Fig.5B)
Install the rear guard in the same way.
Top plate
Front guard
Siphon Pump
Fig.3
8
Carrying handle Top guard
Batteries
Rear guard
Top guard Screws
Fig.2
arrow marking
carrying handle hole
Fig.4
Fig.5A
Fig.5B