Problem
The unit doesn't
operate.
The dehumidi-
fying function
doesn't work.
No air is
discharged.
Operation is
noisy.
13
Troubleshooting
Possible Cause
Has the power cord been dis-
connected ?
Is the tank full indication
blinking? (the tank is full or in
a wrong position)
Is the temperature of the
room above 32°C or below
5°C?
Is the air fi lter clogged?
Is the intake duct or discharge
duct obstructed?
Is the air fi lter clogged?
Is the unit tilted or unsteady?
Is the air fi lter clogged?
Disposal Considerations
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Declaration of Conformity
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2006/212/EU (ErP)
Solution
Plug the power cord into the outlet.
Empty the water in the drainage tank and
then reposition the tank.
The protection device is activated and the
unit cannot be started.
Clean the air fi lter as instructions.
Remove the obstruction from the discharge
duct or intake duct.
Clean the air fi lter as instructions.
Move the unit to a stable, sturdy location.
Clean the air fi lter as instructions.