Operating Instructions - Clarity C4230HS Guía Del Usario

C4230HS
HOW TO CONNECT THE C4230HS CHARGING BASE
120V outlet
Registering
The C4230HS is compatible to the C4220 and the
C4230. In order to use the C4230HS you must
register it to a C4220 or C4230.
To register the C4230HS, place the C4230HS handset
into the main unit until the screen displays: Handset
Registered. It will take approximately 5-10 seconds
for the handset to register to the base.
After registering the C4230HS, the handset will
automatically be assigned a handset number.
8

Operating Instructions

Charge LED – LED will light up
when handset is in base charging.
AC adapter
Battery
• Insert battery pack such that (+) and (-)
• Place handset on base to charge.
• Make sure the charge LED on base
Connect the AC adapter
to the back of the charging
base and a 120V wall outlet
as shown above.
Handset battery must
STOP
charge 12 hours before use.
on battery touch spring in battery
compartment.
is illuminated.
Exit
12:09 04/06
AM
Handset Registered
Save