NSK DynaLED M205LG Manual Del Operacion página 5

• D o not attempt to disassemble the product nor tamper with the
mechanism except as recommend by NSK in this Operation
Manual.
• D o not allow any impact on to the product. Do not drop the
product.
• O perators and all others in the area must wear eye protection and
a mask when operating this motor.
• S hould the product function abnormally, cease operation
immediately and contact your Authorized NSK Dealer.
• D o not use high acid water or sterilizing solutions to wipe, immerse
or clean the product.
• T he products are delivered in a non-sterile condition and must be
autoclaved prior to use.
• P erform regular function and maintenance checks.
• I f the product is not used for a long period check it is functioning
correctly before using on a patient.
• T o avoid clinical downtime it is recommended that a spare be kept
on hand in case of a breakdown during surgery.
• A void continual eye contact with the LED light.
2
• T his product is classified as a Class 1 LED Product.
• I f the LED light does not turn on, glows dim or flickers during
rotation, stop using the motor and contact your Authorized NSK
Dealer.
• U .S. Federal law restricts this device to sale by or on the order of a
licensed physician.
3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point
and set the pressure to the value specified on the specification table.
(Fig. 1)
For Multi Gauge information refer to Option Parts List.
WARNING
• D o not exceed the optimum pressure specified on the specification
table.