Starting Standard Mode Manually; Dimming Or Switching Off The Lighting Temporarily; Starting Holiday Mode; Cleaning And Servicing - Bosch MSGP3L Manual De Usuario

en Cleaning and servicing
Starting standard mode
manually
The device automatically goes into
standard mode after 8 hours of sleep
mode.
To change the start time of stand-
1.
ard mode, wait until the time you
require.
To end sleep mode, touch the
2.
touch button for 3 seconds until
the light unit flashes white twice.
→ Fig.
22
a The lighting will switch on.
a The device starts the 16-hour
standard mode.
a The start time for standard mode is
saved and is retained until it is
changed again.
Dimming or switching off the
lighting temporarily
To dim the lighting, touch the
1.
touch button briefly.
→ Fig.
23
Dimmed lighting ends automatic-
ally after 2 hours.
To switch the lighting off, touch the
2.
touch button briefly again.
To switch the lighting back on,
3.
touch the touch button briefly
again.
Notes
¡ The lighting will automatically
switch on again once the next
sleep mode phase comes to an
end.
¡ Repeatedly dimming or switching
off the lighting on a daily basis
may adversely affect growth of the
plants.

Starting holiday mode

When in holiday mode, plants grow
more slowly and use less nutrient
solution.
28
Requirement: At least one height
module has been inserted.
Top up with nutrient solution to
1.
maximum capacity.
→ "Topping up with nutrient solu-
tion", Page 27
Touch the touch button for
2.
10 seconds until the light unit
lights up pink.
→ Fig.
24
a The device is in holiday mode.
To end holiday mode, touch the
3.
touch button briefly.

Cleaning and servicing

Cleaning and servicing
Cleaning and servicing

Cleaning products

Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.

Descaling the device

Tap water can cause deposits to
build up in the pump and on plastic
parts.
Note: After harvesting your plants,
descale the device.
Requirements
¡ There are no plant capsules in the
plant tray.
¡ The device is assembled and the
light unit fitted.