pj The Elite Serie Manual Del Usuario página 23

(Note: For Windows ME, 2000 and XP, there is no need to install the mass storage driver from the
CDROM. Driver installation is only needed for Windows 98.
PC camera mode
Set the Digital Video to PC Camera Mode (see the section Setup). After turning the Power Switch to
EN
SP
" OFF"position, you can connect your Digital Video to a computer with its supplied USB cable and use it
as a PC camera. With a compatible video capture program, you can capture movies.
INSTALLING THE DRIVER AND PHOTO-EDITING SOFTWARE
You must install all software before connecting the Digital Video to your computer.
(Not Available for MAC)
By connecting your Digital Video to a computer, the Arcsoft opens. Meanwhile your Digital Video
switches to Mass Storage Mode, too. You may choose either to transfer the camera data through Arcsoft
program or through Mass Storage Mode.
a) Click start->program->Arcsoft Camera Suite->Photo Impression 5 to execute Photo Impression 5->Click
DSC / Scanner -> STK014Camera
b) Select and Click " DSC / Scanner" , the diagram will be displayed as follows
c) Click "STK014 Camera" , the diagram will be displayed as follows and enter to PC CAM Mode.
d) Taking pictures and downloading Pictures can be operated in above interface
P-23