Silvercrest SUR 46 A1 Instrucciones De Utilización Y De Seguridad página 76

Example Applications /Before Initial Use
noticeably dirty, it must be changed. If you wish to remove any residu-
al dirt from the cleaned surface, clean the object again for 90 seconds
in fresh liquid.
600 seconds:
This is the longest time interval. Recommended to increase the effec-
tiveness of the cleaning.
Note: If the selected cleaning period is too long, it can lead to inse-
curely attached items, such as fittings, stick-on labels or decorations
becoming detached from the object being cleaned. The same applies
to other insecure items, e.g. the screws on spectacles, which may be
come lose during the cleaning process.
Before Initial Use
Q
Unpacking and setting up the ultrasonic cleaning device:
j
T ake the device carefully out of the box, remove the transport
packaging and check the device for any possible damage that
may have occurred during transport. Check also that all of the
parts are present:
1 x basket insert
1 x curved insert
1 x CD holder
j
I f not all of the parts are present or your new device is damaged,
please contact the service hotline (see guarantee notice).
j
P lace the ultrasonic cleaning device in such a way on a firm, flat
surface that it cannot tip over. This surface should be easy to
clean, brightly lit and readily accessible. Do not place the device
on surfaces that may become hot, e.g. on hotplates or next to a
gas cooker.
76 GB/MT
9
10
11