What's In The Box - Ezviz Lc1 Guía De Inicio Rápida

What's in the Box

Security Light Camera
Security Light Camera
Name
Light Base Ring (Pan)
Light Arm Screw (Tilt)
Light Ring (Rotation)
Camera Arm and Ball-Joint
microSD Card
Reset Button
Wire Connector (x3)
Mounting Screw (x3)
O-ring (x3)
Light Base Ring (Pan)
Light Arm Screw (Tilt)
Security Light
Light Ring (Rotation)
Lens
Camera
Description
Loosen the base ring and pan up to 360º. Tighten the base ring when you have the light panned the way you want.
Loosen the arm screw and tilt the arm up to 180º. Tighten the screw when you have the arm in the position you want.
Loosen the light ring and rotate the light up to 360º. Tighten the screw when you have the light in the position you want.
Move the camera arm in its ball joint until you have the camera in the position you want.
Make sure the base ring and adjustment screws are tightened all the way for each adjustment before proceeding.
• Recommended compatibility: Class 10, Max.128GB.
• Initialize the card in the EZVIZ app before using it.
Hold for 5 seconds to restart and reset all parameters to default.
Screwdriver (x1)
Anchor (x3) Mount and connect the Security Light Camera.
Base Plate
Base
Camera Arm and Ball-Joint
microSD Card and Reset Button (Behind the Door)
1
Quick Start Guide (x1)