bbluv Echo Manual Del Usuario página 8

- Testing product performance with your own heartbeat (see section 4)
Note: The Echö requires no calibration.
8. Visual Inspection
• Carefully inspect the equipment for physical damage.
• Examine the case, connectors and accessories making sure every part
is clean and is not cracked or damaged in any way.
• After the visual inspection, if the Echö and/or its accessories are damaged,
replacement is needed.
9. Cleaning Product and Accessories
• Before cleaning, turn off the Echö, disconnect the earphones
and the recording cable and remove the battery.
• If gel is used, clean it from the transducer probe with a soft cloth.
You can disinfect the probe by wiping it with 70% ethanol or alcohol wipes
and then drying with a soft dry cloth.
• Do not use abrasives, solvents, bleach, steam or high temperature cleaning
processes to sterilize the Echö as any of these can damage it.
• Do not immerse in water or other liquids to clean the Echö.
• Do not disassemble the Echö.
10. Troubleshooting
What appears to be a malfunction may not always be serious. If your Echö does
not perform as expected, consult the table below to see if the problems can be
corrected. If you are unable to resolve the problem, contact bblüv Customer
Service at 1-855-808-2636 or by email at info@bbluvgroup.com
Make sure to always test the Echö with your own heartbeat first to make sure
it is working correctly (see section 4).
6