Daikin Airzone VAF Guía De Instalación Rápida página 13

Control stages (only for installations with relay radiant heat control module)
Select stages to be controlled in heating and cooling: Air, Radiant or Air+Radiant.
Main ID (only if the thermostat has been previously configured as zone)
Select the main thermostat address with which the thermostat is associated. Thus, this main thermostat will impose the
operation mode to the thermostat.
Other settings
Press to conclude the initial setup procedure, or access the advanced settings to change any other settings. Activate the basic
function if required (see Advanced Settings, Zone settings).
Blueface
EN
FR
ES
IT
PT
DE
13