Lite Thermostats - Daikin Airzone VAF Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LITE THERMOSTATS

To configure a Lite thermostat, follow these steps:
Wired Lite thermostat
-
Perform all the appropriate connections.
-
Connect the thermostat.
-
Press the LED
to confirm the association.
-
The number of the zone which associates with the thermostat is the lowest free available number.
If the association is correct, the LED
Wireless Lite thermostat
-
Open the wireless association channel of the main board, wait a few seconds so the zone module, which will be
associated to the thermostat, opens its wireless association channel (the wireless opening LED must be solid red).
-
Insert the battery to supply the thermostat.
-
Press the LED
to begin the wireless search. The LED
IMPORTANT: The thermostat will display first the wireless zone modules which are closer to it. Remember to configure
this thermostat near the wireless zone module to associate for greater comfort.
-
The module which will be associated to the Lite thermostat will begin to make a "beep" for its identification. The LEDS
will show the signal level of this module:
Low signal range level (It is not recommended to perform the association).
o
Medium signal range level.
o
Good signal range level
o
Excellent signal range level.
o
-
Press the LED
to confirm the association, otherwise use
-
The number of the zone which associates with the thermostat is the lowest free available number.
-
If the association is correct, the LED
range.
REMEMBER: Is required to set the Main ID parameter of the Lite Thermostat for its proper functioning (see section Advanced
settings – Blueface thermostat, Zone settings).
Configure other functionalities of the LITE thermostat from the advanced configuration menu of a Blueface thermostat (see
section Advanced settings, Zone settings) or Webserver Cloud (See Webserver Cloud installation manual).
will flash green 5 times.
will flash green 5 times. If it flashes red twice, it means the thermostat is out of
will blink in green.
to select another module.
EN
FR
ES
IT
PT
DE
15

Publicidad

Tabla de contenido
loading

Tabla de contenido