Steren SEG-503 Manual De Instrucciones página 18

Batteries
Remove the cover by sliding it to the
right and insert 4 AA batteries.
You can check the batteries status by
pressing ( # ).
BA-H means batteries are ok.
BA-L means batteries are low and you
will have to replace them.
Never use old and new batteries
together.
12
Open and close the safe
The factory default code to open or close
the safe is 1234.
45
To open the safe, enter your personal 4
digit code or the master code. If it is correct,
"OPENED" will be read on the display.
78
0 0
3
6
9
# #
To enter a new code, with the door opened,
enter a four-digit combination and press "#".
5 5