D-Link DAP-1360 Guía De Instalación Rápida página 3

WARNING! The DAP-1360's power output is 5 volts DC, 1 Ampere. Use only
the power adapter supplied with this DAP-1360 or one with the same power
specifications. Using a power adapter with a different voltage or plugging your
DAP-1360 to a wrong AC voltage outlet will damage this device and will void
the warranty for this product.
Ethernet LAN Port
Can be connected to Ethernet
port of computer, or to an Ethernet
switch or LAN port of a router.
Step 2: Connect the Antenna and Ethernet Cable.
Connect both antennas to the antenna connectors on the back of the DAP-1360.
Connect one end of the Ethernet cable to the LAN port on the back panel of the
DAP-1360, and the other end of this cable to your computer's Ethernet port. If your
computer is connected to an Ethernet network via an Ethernet switch, connect
this end of the cable to the switch's port.
Power Socket
Connect to a 5VDC 1A power
adapter.
3