Quick Starting Guide - TNT HSD 7570 Manual De Operación

1. Connecting to an External Power Source: Connect the power cord
(supplied with the player) to the side input plug and to a wall outlet. Do
not use any other device otherwise specified by your dealer.
2. Open the protective cover: The cover opens to a maximum 135° only, so
please do not try to open it any further.
3. Press the open button on the left to open the discover: Never press the
OPEN button on the left during playback.
4. Inserting a DVD disc: Align the center of the DVD disc with the center of the disc
guide. Press gently down on the DVD to snap the disc into place, then close the disc
cover.
5. Slide the side power switch to 'ON': If you want to replace another disc or if you want
to pull out disc, you should press STOP twice, then after finish spinning disc, then
press OPEN button, then take out it.
6. Press the PLAY button on the player face (Depends on the DVD title,
press the ENTER button): In general, the DVD already inserted into the
player will start reading automatically when power is turned on.
Note:
•
The DVD player will immediately start rendering the DVD program. When you want
to stop, press the STOP button, it will return to the logo. To power off the unit, slide
the ON/OFF switch to the OFF. The DVD player will automatically power off in 20
minutes after entering screen saver mode. To reset the unit, first slide power switch
to 'OFF', and then slide it to 'ON'.

Quick Starting Guide

7