Battery Information; Replacing The Battery; Battery Disposal - Python 4105P Manual Del Usuario

Battery Information

The remote control is powered by two 3V, CR2016 batteries. When
the battery begins to weaken, operating range is reduced and the LED
on the remote control dims.

Replacing the Battery

1. Use a small flat blade screw driver and insert it into the slot located
along the bottom of the remote, near the key ring. Carefully pry
open the case.
2. Remove the old batteries from the holding clip. Orient the new
batteries for the correct polarity and insert into the holding clip.
3. Reposition the case parts, then snap together by pressing firmly
and evenly on the front and back.

Battery Disposal

Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal.
12
© 2015 Directed. All rights reserved.