Connecting To Your Tv Or Sound System; Pairing - Marmitek Boomboom 50 Modo De Empleo

CONNECTING TO YOUR TV OR SOUND
SYSTEM
1a TV
Plug one end of the mini jack plug cable into your TV's
headphones jack. Your TV speakers are likely to be switched
off now and you can adjust the volume using your TV's remote
control (also refer to your TV's operating instructions).
1b Hi-Fi
Use the supplied adapter cord to connect the BoomBoom 50
to an analogue output (AUX OUT, TAPE OUT) on your audio
system.
2 Connect the other end of the mini jack plug cable to the
BoomBoom 50's Audio In.

PAIRING

1. Make sure your Bluetooth headphones are close to the
BoomBoom 50. The best distance is about 1 metre.
2. Put your Bluetooth headphones in pairing mode (please refer
to your headphones' user manual).
3. Connect the BoomBoom 50's USB connector to a USB port
on your TV or possibly use a USB power adapter (not
supplied).
4. The BoomBoom 50 will now be automatically paired with
your headphones. Once the pairing has been established,
the blue LED on the BoomBoom 50 will light up continuously
(this may take a while).
BOOMBOOM 50 5