Features; Setting Up Your Monitor - Insignia IS-LM100761 Guia Del Usuario

IS-LM100761_combo.fm Page 3 Tuesday, April 19, 2005 8:51 AM
IS-LM100761 15-inch Monitor
• When replacement parts are required, make sure that the service
technician has used replacement parts specified by the manufacturer
that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
• Upon completion of any service or repairs to this monitor, ask the
service technician to perform routine safety checks to determine that
the monitor is safe to operate.

Features

• The convenient and user-friendly on-screen display allows you to
make easy and accurate adjustments of screen size, position, and
color.
• Advanced color controls for allow you to fine-tune the color to meet
your own personal tastes or application requirements. Use the
on-screen controls to adjust the color temperature or RGB gain value
for the best possible screen color and intensity.

Setting up your monitor

To set up your LCD monitor:
1 Remove the LCD monitor from the box, then remove the plastic bag and
foam.
2 Rotate the base so it can support the monitor.
You can adjust the panel from vertical to 20 degrees back from vertical.
Although the base was rotated more than 20 degrees for shipping, it is
unsafe to rotate the monitor more than 20 degrees while it is standing.
3 Turn off your computer.
4 Connect the VGA cable to your computer's VGA port, then tighten the
VGA connector's thumbscrews to secure it to your computer.
5 Connect the VGA cable to your monitor's VGA port, then tighten the VGA
connector's thumbscrews to secure it to your monitor.
www.insignia-products.com 3