Tabla De Contenido - Benchtop BT400 Manual Del Propieratio

389997 -00/BT400 Jig Saw
• Warranty / Introduction / Tool Specifications ..............................................................................2
• General Safety Rules ..............................................................................................................3-6
• Additional Safety Rules ..............................................................................................................6
• Assembly/Set-Up ........................................................................................................................7
• Operating Instructions ............................................................................................................8-9
• Accessories ................................................................................................................................9
• Maintenance ..............................................................................................................................9
BENCHTOP
If this BENCHTOP
materials or workmanship within 2 years from the date of purchase,
Kmart will replace the tool, free of charge.
WARRANTY REPLACEMENT IS AVAILABLE BY RETURNING
THE TOOL TO THE NEAREST KMART STORE ALONG WITH RECEIPT
This warranty does not include damage/defects caused by or resulting from
abuse, accidents, alterations or commercial use. It also does not cover
accessories. This warranty does give you specific legal rights, and you
may also have other rights which vary from state to state.
Kmart Corporation, 3100 Big Beaver Road, Troy, Michigan 48084
For repair / replacement parts after warranty has expired, call: 1-800-544-6986
Your Jig Saw has many features that will make your job faster and easier.
Safety, performance and dependability have been given top priority in the
design of this tool, making it easy to maintain and operate.
CAUTION:
Carefully read
through the entire manual before
attempting to use this tool. Be sure to
pay special attention to the Warnings
and Cautions on page 6 in this
manual. If you use the tool properly
and only for the operations for which
it was intended, you can enjoy years
of safe, dependable service from it.
11/3/03 2:48 PM Page 2
TABLE OF CONTENTS
WARRANTY
FULL 2 YEAR WARRANTY ON
VARIABLE SPEED JIG SAW
®
Jig Saw is found to be defective in
®
SHOWING DATE OF PURCHASE.
INTRODUCTION
Bevel Capacity
Strokes per Minute
Voltage
Cutting Stroke
2
SPECIFICATIONS:
45 degrees
800-3,200 SPM
120 Volts
11/16"