Vollrath Grill Tender 1101 Manual Del Operador página 3

r B a
eplacing lade SSemBly
Sharp Blade Hazard.
Blades are sharp and can cause cuts. To avoid
injury from sharp blades, handle with caution.
Wash new blades with warm, soapy water and rinse thoroughly to remove
the thin protective oil film. Keep the sharp edge away from you when
handling blade.
1. Familiarize yourself with the Exploded View diagram for your equipment.
2. Loosen the set screws with an Allen wrench. See Figure 2.
3. Carefully remove the blade (A) and pressure plate (D). Properly dispose
of the old blade.
4. Carefully align the replacement blade (A) and pressure plate (D) into the
groove of the head section casting/handle (B).
5. With the pressure plate (B) and blade (A) in place, firmly tighten the set
screws (E).
WARNING
S p l
pare artS iSt
Call
Part No. Description
Out
A 1102R Blade, Single G.T.S.
Knob Assembly includes Knob and
B 1105R
Bolt
C 1106R Blade Pressure Plate
D 1107R Set Screws
e V
xplOded iew
B
D
C
A
Figure 2. Exploded View
B
O ' M
peratOr s anual
3