Rockford Fosgate POWER TMS65 Guia De Inicio Rapido página 10

Installation
Unplug the terminals to disconnect the speaker.
Step 2 - Speaker & Grille Installation
Take the new Rockford speaker and slide the wire connectors over
the terminals.
NOTE: The smaller terminal is the positive (+) and the larger
terminal is the negative (-).
Prior to installing the speaker to the pod, there are alignment pins
on the pod that the speaker needs to line up to ensure proper fit.
10
Secure the speaker to the pod using the factory hardware.
NOTE: Do not overtighten screws. Doing so can strip the threads
on the plastic pod.
Once the speaker is secured, press the new grille into place.