Rockford Fosgate POWER TMS65 Guia De Inicio Rapido página 9

Attach the new Rockford grille to the inside of the fairing.
NOTE: The speaker grilles are side specific and have a notch in one
of the mounting holes as an indicator. The notch is faced towards
the middle of the bike.
Reattach the pod with the factory hardware and reinstall any wire
harnesses that were removed for the pod removal.
Install the outer fairing to the motorcycle after speaker pods and
wiring is secured.
Front Speakers for Road Glide
Ultra models.
®
Step 1 - Speaker & Grille Removal
Remove the factory speaker grille with a plastic pry tool or small
hook tool.
NOTE: Pull or pry on the portion of the grille that is closer to the
inside of the bike.
Remove the mounting screws holding the speaker in place.
Installation
and Road Glide
®
9