Installation And Wiring - koban KDP8 2H Manual Del Usuario

KDP8 - 2/3 wires detector
Motion detector wall switch

Installation and wiring

Please disconnect power completely and read the entire instruction manual
carefully before installation
Select a proper location
Detection coverage
It is recommended to install at the height of 0.8M - 1.2M. The forward
detection distance can reach up to 8M and 180° detection angle (See FIG.3).
Helpful tips for installation
Since the detector is in response to temperature change, please avoid the
following conditions (See FIG.4-A & FIG.4-B):
• Avoid directing the detector toward the objects whose surfaces are highly
reflective, such as mirror, monitor, etc.
• Avoid mounting the detector near heat sources, such as heating vents, air
conditioners, vents as dryers, lights, etc.
• Avoid aiming the detector toward the objects which may be swayed in the
wind, such as curtain, tall plants, miniature garden, etc.
Instructions manual | 22 www.grupotemper.com