GeoMax Zenius5 Serie Guía Rápida página 14

Turning on the
Zenius5
step-by-step
Instrument Components
0013770_001
Step Description
1. Place the Zenius5 on a flat and stable surface or hold the device in
your hand.
2. Ensure that either the device is connected with the AC power adapter
or the batteries are charged up.
3.
Press and hold Power key
from red colour to green colour.
The operating system needs usually about 30-40 seconds for booting
up. When the main screen is displayed, the Zenius5 is ready to use.
until the LED power indicator turns
Zenius5 | 12
en