Publicidad
Idiomas disponibles
Idiomas disponibles
PAG 12
GENERAL APPLICATION
Watch the movie you rent on any TV in house without moving your VCR, laser disc player or running messy cables.
Watch cable or satellite programs on any TV in house.
Listen to stereo-quality music from your receiver on any powered speakers
inside or outside the house.
Uses multi-receivers for broadcasting to numerous TV sets in other rooms.
Show computer images on a remote TV. (Additional equipment required)
SAFETY & SECURITY APPLICATION:
Applies as a wireless security system.
Monitor your sleeping baby, playing children, the elderly, or the disabled on TV using your existing camcorder.
See who is outside the door on TV through your camera or miniature CCD camera.
Monitors and records meeting from another room.
And many more uses!
THE USING ATTENTION.
The outlet of the power supply must have the same voltage as the local area.
Be sure the transmitter and the receiver were connected to the equipment correctly (e.g. Connect the transmitter to the
VCR, and the receiver to the TV).
When switch is off from transmitter or receiver, it needs to wait for a few seconds in order to restart again.
Adjust antenna plate for least interference. (Adjustment cannot rotate more than ±180°)
In most situations, one set of equipment has a better feature within 100 meter. When two equipment or more is used at
the same time, used different channels. But a transmitter can be used with several receivers at the same time.
The channel selectors allow you to choose the channel for best feature and least interference.
When the equipment is operating, please do not use a microwave oven near by.
The remote control should face to the receiver IR remote control window, and the transmitter IR remote control window
(or IR extender) should face to the source A/V equipment. The IR remote has to be within the standard distance.
PANEL CONTROLS AND FEATURES OF DUPLEX FUNCTION TYPE.
The following illustrations show the names of each component, button and switch connectors on the transmitter and
receiver.
SETTING UP 5.8GHZ WIRELESS AV LINK. (PAG 2).
To enjoy wireless video and audio, just connect the transmitter to whatever audio/video source you want to enjoy from
another location, and connect the receiver to the TV, monitor or powered speakers in that other location.
A/V link system is suggested to connect to following A/V equipment use.
Make sure the ON/OFF switch is in the OFF position before connection
Video sources. VCR, Cable set-top box (with A/V output), Satellite Receiver, Laser Disc Player, Camcorder or Miniature
CCD Camera, Digital decoder, DVD
Audio sources. Compact Disk player or Changer, Stereo Receiver, Cassette Deck.
HOW TO TRANSMIT AUDIO/VIDEO FROM YOUR VCR. (PAG 2).
1. Connect one set of audio/video (A/V) cables (RCA or SCART cable) to the A/V jack of the transmitter and to the A/V
output jacks (RCA or connector) on the back of your VCR.
2. Plug one end of the power adapter into the back of the transmitter and the other end into any 230-volt wall outlet (or
120-volt). Use only the adapter provided.
Publicidad
