Publicidad
Idiomas disponibles
Idiomas disponibles
MWLSFDC 400LM Cordless Work Light
risk of injury when used on another
light.
15. CAUTION: Magnetic forces can
be harmful to personal property
and equipment including cell phones,
computers, diagnostic equipment and
credit cards.
16. Do not store light at temperature
above 120°F (49°C).
17. This product may contain one or more
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands thoroughly after handling.
Service:
18. Light service must be performed only
by the MATCO authorized service
centers listed. Service or maintenance
performed by unqualified personnel
may result in a risk of injury. Repair
by unqualified personnel, use of
unauthorized parts, and failure to
follow maintenance instructions may
create a risk of shock or injury.
Specific Safety Rules:
DO NOT let comfort or familiarity with
product replace strict adherence to
FEATURES
• COB LED provide similar lighting as a fluorescent bulb (75-155 lux and 400 lumen)
• 3.7V 4400mAh Li-ion rechargeable battery for continuous use up to 3 hours on high or 6 hours on low
• Automatic shut off and over charge protection prolongs battery life
• Rubber grip design provides non-slip grip
• 2 Pc. 360° rotating hook for easy use
• 2 magnets on back of light secures to any metal surface
• IP54 (water and dust resistent)
• Includes a cULus listed micro USB adapter
OPERATING INSTRUCTIONS
• To use, plug the unit into any 100-240V AC power source, such as a wall receptable. Let the unit fully charge
until the green indicator on the adapter turns on before use.
• Charge the light every month if not in constant use, and after each use, it is used often to insure longevity.
• Press the on/off switch once to turn on high light.
• Press the on/off switch again to turn on low light.
• Press the on/off switch a third time to turn off.
MWLSFDC
WARNING
cordless product safety rules. If you use
this tool unsafely or incorrectly, you can
suffer serious personal injury.
1. Hold light by insulated gripping
2. Be aware that this light is always in
3. Always be sure you have firm footing.
4. Be sure no one is below when using
5. Some material contains chemicals
WARNING: MISUSE or failure to follow
the safety rules stated in this instruction
manual may cause serious personal
injury.
3
surfaces when performing an
operation avoiding contact with
hidden wiring. Contact with a "live"
wire will also make exposed metal
parts of the light "live" and shock
the operator.
operating condition, because it does
not have to be plugged into an
electrical outlet.
the light in high locations.
which may be toxic. Take caution to
prevent working dust inhalation and
skin contact. Follow material supplier
safety data.
07/12/17
Publicidad
