Ip Camera Configurations; Add Camera By Automatic Assignment - Urmet 1093/900 Guía Rápida De Configuración

Vr h.264 con hdmi, h.264 with hdmi nvr, nvr h.264 mit hdmi, nvr h.264 con hdmi, nvr h.264 avec hdmi

Ocultar thumbs Ver también para 1093/900:

Tabla de contenido

Idiomas disponibles

IP CAMERA CONFIGURATIONS

4.1

To quickly add the IP cameras in the NVR, access the OSD menu (default password: 00000000), open the page [Display

→ IP Camera] and select [Auto assign] as shown in the figure below.

If cameras are correctly added, they are displayed in the list with a green arrow and automatically LIVE displayed on the

monitor.

If for any reason the NVR doesn't connect to the camera, this one is displayed in the list with a grey arrow and its images

aren't displayed.

If the NVR doesn't connect to the camera, the user has probably configured in the camera a password different from the

default one (admin); in this case, click on the "green pencil" icon (circled in red in the figure below).

Change the camera current password used by the NVR, as shown in the figure below, then confirm.

DS1093-154A

Tabla de Contenido

Tabla de contenido