Parts And Tools; Tools Needed; Included Components - Werner AH2210 Serie Instrucciones De Instalación

Parts and Tools For AH2210, AH2510 & AE2210 Aluminum Attic Ladder
DO NOT REMOVE NYLON TIE HOLDING THE LADDER SECTIONS
ADDITIONAL MATERIALS NEEDED
(10) #8 Deck Screws, 2"
1 x 4 Temporary Support Boards
(2 pieces approximately 32" long)
Shims
INCLUDED FASTENERS
(10) 1/4" Hex Head
Lag Screws
3" Long
(2) 1/4"- 20 Hex Head
Cap Screws
3/4" Long
(2) 1/4" - 20 Lock Nut
(11) 1/4" Washers
2
TOGETHER UNTIL INSTRUCTED

TOOLS NEEDED

Carpenter's Square
Drill
Hammer
Hacksaw
Drill Bit, 1/8"
Drill Bit, 9/32"
Pencil
Stepladder
Tape Measure
Wrench, 7/16" (2)
Phillips Driver

INCLUDED COMPONENTS

(1) Left Foot
Assembly
(1) Ladder Assembly
(1) Pull Rope
Assembly
(1) Right Foot
Assembly