Preparing The Controller - Hama Black Thunder Instrucciones De Uso

G Operating instruction
Controls and Displays
Controller charging station:
1. Charging cradles with contact pins
2. Status LEDs for each charging cradle
3. Micro USB port
Rechargeable battery with integrated battery
compartment cover:
4. Charging contacts
5. Micro USB port with status LED
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Controller charging station
• 2 Controller rechargeable batteries, 720 mAh
• 1 micro USB charging cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Keep this product, as all electrical products, out of the
reach of children!
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
given in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
2
Warning - Batteries
• When inserting the rechargeable batteries, always
make sure that the polarity is correct ("+" and
"-" markings). Failure to do so could result in the
rechargeable batteries leaking or exploding.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain
toxic, environmentally unfriendly heavy metals.
• Do not allow batteries/rechargeable batteries to
discharge completely.
• Do not tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
• Do not short circuit the batteries/rechargeable
batteries and keep them away from uncoated metal
objects.
4. Startup and Operation

4.1 Preparing the Controller

• Remove the original battery cover from the Controller.
• Insert one of the rechargeable batteries with integrated
battery compartment cover, observing the correct
polarity. You will hear the rechargeable battery click into
place when it has been inserted correctly.
• To remove the rechargeable battery, press the opening
symbol and slide the rechargeable battery out of the
Controller in the direction of the arrow.
4.2 Charge
• Connect the micro USB cable to the micro USB port (3)
of the charging station.
• Connect the USB A plug with a free USB port on the
console. The charging station is now ready for use.
• Turn the Controller upside down, so that the installed
rechargeable battery pack is facing downwards, and
insert it in the charging cradle (1) such that the charging
pins make proper contact with the charging contacts (4).
• The corresponding status LED lights up in a constant
green light to indicate that the controller is being
charged.
• Once charging is complete, the LED goes out, meaning
that you can remove the controller from the charging
station.