Guardian Sensor 3 Guia Del Usuario página 13

Note: Medtronic adhesives are pressure-sensitive. Pressing
the adhesive against the skin ensures that the sensor remains
adhered to the skin throughout the wear period.
12a
12b
13a
12a. Hold the sensor in place and gently
remove the adhesive liner from
under the adhesive pad. Do not
remove the adhesive liner from the
rectangular adhesive tab. This tab
will be used to secure the transmitter
in a later step.
12b. Firmly press the adhesive pad
against the skin to make sure that
the sensor remains adhered to the
skin.
13a. Untuck the adhesive tab from under
the connector.
- 11 -
Note: After insertion, use
of adhesive products
such as Skin Tac™ in
addition to the tape
is optional. If optional
adhesive products are
used, apply to the skin
under the adhesive
pad prior to removing
the liner. It can also be
applied to the adhesive
pad or the skin around
the sensor base. Allow
for product to dry.