Special Care Features; Fabric Softener; Rinse + Spin; Special Drain Feature - LG WT1150C Serie Manual De Propietario

SPECIAL CARE FEATURES

After selecting a cycle, press the Special Care button
to select additional features for your load.
NOTE:
y To protect your garments, not every feature is
available with every cycle.
y If the START/PAUSE button is not pressed within
60 minutes to start the cycle, the control will shut
off and all settings will be lost.
SOAK
This option provides 30-minutes presoak prior to the
start of the selected cycle. Use the Soak option to
presoak garments to help remove difficult spots or
stains on fabrics. At the end of the presoak time, the
selected cycle will begin with the same water used
for the soak.
NOTE: You cannot select the Soak option in the Tub
Clean.
SPIN ONLY
Use this option to drain the water from the tub and
spin out the clothes. This can be used, for example,
if the wash cycle is interrupted by a power failure.
1. Press the POWER button to turn on the washer.
2. Press the Special Care button repeatedly until
Spin Only is selected.
3. Press the START/PAUSE button.

FABRIC SOFTENER

Fabric Softener is dispensed in the final rinse. Select
the Fabric Softener button to optimize the final rinse
for fabric softener use.

RINSE + SPIN

Select this option to rinse and spin a load separately
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics. You can change
the spin speed by pressing the Spin Speed button.
1. Press the POWER button to turn on the washer.
2. Press the Special Care button until the Rinse+Spin
indicator light is lit. (The cycle light will turn off.)
3. Press the START/PAUSE button to start the cycle.

SPECIAL DRAIN FEATURE

This washer is equipped with a special feature that is
designed to make your washer as safe as possible.
If the washer is paused or shut off while there is still
water in the tub, the water will drain automatically
after several minutes of inactivity. This helps keep
children safe by reducing the possibility of water
remaining in the tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If the
washer is paused and the START/PAUSE button is
not pressed within 60 minutes, the washer will shut
off and all cycle settings will be lost. And any water
remaining in the tub will be drained.
The washer can be turned on or restarted any time
before the drain begins. However, once the washer
begins to drain, all controls and functions will be
disabled until the water has been completely drained
and the washer shuts off.
23
HOW TO USE