Cleaning Floors; Fitting The Accessories; Cleaning And Maintenance - weasy NVP15 Manual De Usuario

Warning - risk of injury!
Warning ! This cap gets hot in use; handle with care.
Attach the floor brush to the extension wands, which snap together. Then attach the extension wand
to the steam gun. Do ensure the extension wands are firmly connected. Before cleaning
always remove dust from the surface you wish to clean. To release the extension wands press the
button on the hose connection.
Cleaning floors & carpets with the cleaning cloth.
While the machine is switched off attach the cleaning cloth to the floor brush via the spring loaded
clips, make sure the edges of the cleaning cloth are secure. DO NOT attempt to do this while the
machine is still hot. Never remove the cleaning cloth whilst the safety trigger is released or the
machine is warm to the touch.
Warning - risk of injury !
The accessories may be fitted to the steam gun(9) using one or both adaptors 16a and 16b. When using
the round brushes or high-pressure nozzle, Squeegee head ,adaptors 16a and 16b are both required.
Cleaning and maintenance operations should be
carried out with the appliance disconnected from the
power supply.
The machine should be allowed to completely cool down
before it is stored away or cleaned.
Clean the machine and its accessories with a slightly
damp cloth only. Never use a cleaning product or
detergent. To ensure that your machine operates
correctly over a long period, rinse out the water tank
once a month to remove lime-scale deposits. Never use
vinegar or a lime-scale remover.

CLEANING FLOORS

FITTING THE ACCESSORIES

CLEANING AND MAINTENANCE