Switching On The Appliance - weasy NVP15 Manual De Usuario

Before switching on the appliance, check that the mains voltage that you want to use
is suitable for the appliance. The information you need for this is shown on the
identification plate. (230V~50Hz).
Second : Using
a) Spraying steam
When the steam cleaner is running and you want to clean:
First, press the red safety button to the "ON" position. After that, press the steam
trigger. Steam will come out. Simply press the steam trigger when you want to clean
everywhere. (Picture 2)
b) Spraying continuous steam jet
If you want continuous steam, do not stay pulled the trigger. Press the trigger and put
the safety button to the "Off / Lock" position. The steam will continuously.
C) Stop
After cleaning, it is preferable to stop the steam gun. If you're clean as Picture 4 and
you want to stop, just put the safety button to "ON". The steam will stop out of the gun.
After that, replace the safety button to the "off / lock" position to lock. (Picture 5-1)

SWITCHING ON THE APPLIANCE

HOW TO USE THE STEAM GUN
First : Know your steam gun.
You will find the Steam trigger & red safety button on
steam gun.
You will
writing "off/lock , on". (Picture 1)
notice that the safety button is